LSD vleugeldeuren Opel Astra H/GTC 03/05-
LSD vleugeldeuren Opel Astra H/GTC 03/05- Type: A-H/C, coupe, convertible GTC a. Twin Top Bouwjaar: 03/05- Opmerkingen: a/ b/ d/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Calibra 06/90-
LSD vleugeldeuren Opel Calibra 06/90- Type: A Bouwjaar: 06/90- Opmerkingen: a/ c/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Corsa 03/93-8/00
LSD vleugeldeuren Opel Corsa 03/93-8/00 Type: Corsa B, -B, S93 3-door Bouwjaar: 03/93-8/00 Opmerkingen: a/ b/ f/ i/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Corsa 09/00-
LSD vleugeldeuren Opel Corsa 09/00- Type: Corsa C 3-door Bouwjaar: 09/00- Opmerkingen: a/ b/ f/ j/ k/ o Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Corsa 10/06-
LSD vleugeldeuren Opel Corsa 10/06- Type: Corsa D 3-door Bouwjaar: 10/06- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel GT 07-
LSD vleugeldeuren Opel GT 07- Type: K / R Bouwjaar: 07- Opmerkingen: a/ b/ c/ /j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Speedster 09/01-
LSD vleugeldeuren Opel Speedster 09/01- Type: E00TARGA Bouwjaar: 09/01- Opmerkingen: a/ d/ f/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Tigra 11/94-
LSD vleugeldeuren Opel Tigra 11/94- Type: S93 Coupé Bouwjaar: 11/94- Opmerkingen: a/ b/ f/ i/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Tigra Twin-Top 06/04-
LSD vleugeldeuren Opel Tigra Twin-Top 06/04- Type: X-C/Roadster Bouwjaar: 06/04- Opmerkingen: a/ b/ d/ f/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Peugeot 106 05/96-
LSD vleugeldeuren Peugeot 106 05/96- Type: 1*… Bouwjaar: 05/96- Opmerkingen: a/ b/ d/ f/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Peugeot 206 09/98-
LSD vleugeldeuren Peugeot 206 09/98- Type: 2* ... * 3-door Bouwjaar: 09/98- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Peugeot 206 09/98-
LSD vleugeldeuren Peugeot 206 09/98- Type: 2* ... * 206 CC Bouwjaar: 09/98- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Peugeot 207 02/07-
LSD vleugeldeuren Peugeot 207 02/07- Type: 207 CC Bouwjaar: 02/07- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Peugeot 207 04/06-
LSD vleugeldeuren Peugeot 207 04/06- Type: Typ W 3-door Bouwjaar: 04/06- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Peugeot 307 10/03-
LSD vleugeldeuren Peugeot 307 10/03- Type: 3*…* 307 CC Bouwjaar: 10/03- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Porsche 911 09/04-
LSD vleugeldeuren Porsche 911 09/04- Type: 997 Carrera Bouwjaar: 09/04- Opmerkingen: a/ b/ c/ i/ j/ o Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Porsche 911 09/97-
LSD vleugeldeuren Porsche 911 09/97- Type: 996 all variants Bouwjaar: 09/97- Opmerkingen: a/ b/ d/ i/ j/ o Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Porsche Boxster 98-
LSD vleugeldeuren Porsche Boxster 98- Type: 986 incl. Boxter S Bouwjaar: 98- Opmerkingen: a/ b/ d/ i/ j/ o Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Porsche Cayman 01/06-
LSD vleugeldeuren Porsche Cayman 01/06- Type: 987 Coupe Bouwjaar: 01/06- Opmerkingen: a/ b/ c/ i/ j/ o Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Renault Clio 09/98-
LSD vleugeldeuren Renault Clio 09/98- "Type: ""Clio2; B"" " 3-door Bouwjaar: 09/98- Opmerkingen: a/ b/ d/ f/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Renault Clio 10/05-
LSD vleugeldeuren Renault Clio 10/05- "Type: ""Clio C; R"" " 3-door Bouwjaar: 10/05- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Renault Megane 05/04-
LSD vleugeldeuren Renault Megane 05/04- Type: M Sport, Cabrio 3-door Bouwjaar: 05/04- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Seat Ibiza 02/02-
LSD vleugeldeuren Seat Ibiza 02/02- Type: 6L Bouwjaar: 02/02- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Seat Ibiza 11/93-8/99
LSD vleugeldeuren Seat Ibiza 11/93-8/99 Type: 6K/C, 6K, not for Facelift 3-door Bouwjaar: 11/93-8/99 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Seat Leon 09/05-
LSD vleugeldeuren Seat Leon 09/05- Type: 1P Bouwjaar: 09/05- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Seat Leon 11/99-
LSD vleugeldeuren Seat Leon 11/99- Type: 1M Bouwjaar: 11/99- Opmerkingen: a/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Smart Roadster 03-
LSD vleugeldeuren Smart Roadster 03- Type: 452 Bouwjaar: 03- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Suzuki Swift 05/05-
LSD vleugeldeuren Suzuki Swift 05/05- Type: MZ 3-door Bouwjaar: 05/05- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Suzuki Swift 05/05-
LSD vleugeldeuren Suzuki Swift 05/05- Type: 5-door Bouwjaar: 05/05- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Toyota Celica 11/99-
LSD vleugeldeuren Toyota Celica 11/99- Type: T23 Coupe Bouwjaar: 11/99- Opmerkingen: a/ b/ c/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Toyota MR 3 05/00-
LSD vleugeldeuren Toyota MR 3 05/00- Type: W3 Convertible Bouwjaar: 05/00- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Toyota MR2 12/89-05/00
LSD vleugeldeuren Toyota MR 2 12/89-05/00 Type: W2, W20 Coupe Bouwjaar: 12/89-05/00 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren VW Bora 10/98-
LSD vleugeldeuren VW Bora 10/98- Type: 1J Sedan, Wagon Bouwjaar: 10/98- Opmerkingen: a/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren VW Corrado 9/88-
LSD vleugeldeuren VW Corrado 9/88- Type: 53i Bouwjaar: 9/88- Opmerkingen: a/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren VW Eos 05/06-
LSD vleugeldeuren VW Eos 05/06- Type: 1F Bouwjaar: 05/06- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren VW Golf II 8/83-12/92
LSD vleugeldeuren VW Golf II 8/83-12/92 Type: 19E 3-door Bouwjaar: 8/83-12/92 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.